Quality Bread Crate Mold

As crate supplier of Schoeller Arca (a worldwide leader in the plastic RTP solutions), SINO HOLDINGS GROUP could offer a broad range of top quality crate molds of bread crate,bottle crate, vegetable & rruit crate, foldable small/large containers, stackable containers, One-off Thin-wall Crate, etc.

kinds of crate mould

Usually, SINO always place much attention on every detail of a high quality crate mold molding, some key points of bread crate mould, as follow for your reference:

  1. Steel. Good and suitable steel is the vital for all kinds of molds, not the best is best, which sometimes results in high cost with low competitiveness.

  2. Injection. Reasonable design of molding injection could improve the quality of crates with solving some troubles unnecessary.

3.  Air venting system. It would be troublesome if there is absurd design of air venting, such as flow mark, blister, burn mark, which will result in unnecessary losses.

4.  Cooling system. This is not only a key step in the realization of the inherent quality of product, but also short cycle time. There are professional engineering teams with experience on cooling of crate molding.

5.   Insert interchangeable. Which could make it true that one set mold can product multi-kind crates, enhance the usage of mold greatly.

6.   Ejection. It is well-known that good ejection could reduce much cost and improve the efficiency and safety when operator working.

7.   Cavity selection and injection machine Model that suitable for crate mold. SINO is engaged in plastic production lines, so our mold is high match to injection molding machine, which will be better for plastic manufacturers. But if you are in the market for mold, SINO can also offer the best design of mold to meet the requirement.

Regarding the market, SINO offer quality crate mold to Europe (main market), South America , Africa, etc. Ensure that best customized crate mould could be offered with timely service, SINO would like to grow better and better with good-faith partners.

bottle crate

Welcome to consult, visit SINO for studying more.Any questions, kindly contact me.

Lucy | SINO

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

COMPETITIVE IML SOLUTIONS WITH PRODUCTION LINE OF THIN-WALL CONTAINER

As we all know that fantastic labeling of container could increase its allure to final users, one of reasons of IML’s rise, which should be considerate. SINO Holdings Group, engaged in plastic production lines, kindly pays attention to those requirements for clients, experienced in IML with whole line when necessary. Then a complete and efficient production line could generate more revenue.

NOW, some key points are listed for your reference when you are in the market for IML.

1.       Thickness of container

In general, it would be better that the thickness of product is 0.5 – 0.8 mm for thin-wall one with IML processing.

2.       The matching between the devices

There would be low efficiency if the equipment is not matching, especially for mold, injection molding machine and IML robot system. Such as those question considered:

a.       Does the model of molder match mold?

b.       Is there enough room for robot labeling and taking products?

c.       There is forming a complete set of mold and robot, including the center distance, arrangement condition of mold in machine as well.

d.       The type of robot: side or top enter? Usually depends on the size of production and cycle time required.

3.       Why is center distance important?

This requirement is key base for multi-cavity mold, because there is distance between cavities, the same as gripper and suction cups, which should be consistent, otherwise, there would be troubles in labeling and taking action as limited adjustment of robot.

4.       The position of IML

To make the performance well, the labeling position of product could also not be ignored, for it involves the design of molding. For example, if a box need to label on bottom, then its molding’s sprue and ejection would be same side; but at different sides when labeling on wall.

More intuitively, kindly visit videos: https://youtu.be/iFQasFCVyBo

SINO ensure that IML Solution customized could improve your production for high speed, short time with stable performance. Why not learn more about SINO IML with little time for improvement for long running.

Customized IML molding solution of SINO | China

Any questions, kindly contact me.

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

The Key Points Of Thinwall Container Mold Compared With Normal One

As development of technology and increasing requirement of people, thinwall container could be more popular, especially for food, like ice cream, yogurt, drink. So you can see that there is enormous market demand. And SINO HOLDINGS GROUP could offer the turnkey solution for those who’d like to strengthen themselves by higher-speed injection molding molder, higher-quality mold and more professional IML system.

Now, Let’s share some key points noticed of thinwall container mold, which would help you when you are in the market for it.

1.    What is tninwall container?

Generally speaking, it should satisfy the two conditions: a. capacity (volume)-- under 1 L, b. thickness of sides within 0.65mm.

2.    The basic difference:

·       higher precision on processing

           machining error could be +- 0.015g with no off centre, otherwise, there would be many problems with the parts produced, which can be fatal, not only at once, but also permanent.

·       Hi-speed operation

The better steel made，the better mould will be. It depends on the huge production everyday. And note that general class steel could not meet the demand just by hardening.  

  

3.    IML when necessary

IML would require super-smooth surface especially for where need labeling, which should improve design of mould, one is making the ejection and injection at the same side.

The injection molding machine also could be affected, it must offer enough motor energy to make the high speed come true, then shorten cycle time by good ways.

4.    Expected performance of Customer’s product

All things we tried are just helping customers get good market, then we could grow better and better together.

Detailed notes on it can’t be listed in this short passage, and any comments would be appreciated. Feel free to talk me about your opinion and what you want exactly for thin-wall food can mould. SINO would try best to solve troubles about this area, other plastic parts as well.

thinwall container mould

Kindly contact me if any question.

Lucy

Mail:sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)