How To Setup Syringe Making Factory

Starting a new factory for making medical syringe is required much. Except the license for allowing to manufacture the syringe, there are much things that SINO HOLDINGS GROUP can help do to support your.

Kindly visit the video here, you can find that if you’d like, everything SINO could offer as a support, after all, SINO is engaged in offering injection mould and machine solution. But for the syringe making line, there are solutions offered successfully, so you can trust and try to find how the solution is.

As video showed, you must find there are 5 parts for producing the syringe:

1. Injection molding for syringe set, including syringe barrel, syringe plunger, syringe gasket, syringe top cap, syringe hub (needle seat), which need moulds and injection machines.

2. Printing barrels by machine

3. Assembling syringe sets by automatic line (which can also need needle assembly machine)

4. Packaging syringe

5. E.O Gas Sterilizer Machine

Looks so nice, with little labor but full-automatic making line for syringe, isn’t it? So if you’d like to setup a plant for producing them by yourself, kindly contact me.

Details can be show if you’d like, anyway, Lucy is always here for you.

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

How To Ensure A Mould Work For Longer Time

Regular maintenance for mould is pretty important to prolong the mould life. As working situation of injection mould, high pressure, high temperature and clamping & sliding frequently, for long-term running, it will be no use finally, then new one need to be made again and again. Anyone who is up to plastic injection product knows that how the disaster is if the mould always need to stop and repair.

It is never too much to overemphasize the importance of the perfect mould to manufacturers for plastic product (for mould maker as well). As you can see that it will affect the development of company, such as for the unnecessary cost and terrible brand for bad product. No one is willing to buy from you normally. No change, no life.

To put out the worries about above, must note some very significant points:

1.       Mould Design

2.       Mould Tool

3.       Regular Maintenance for mould

Regarding the point 1 and 2, it should be controlled by mould maker, and for you, can also do something for prolonging the service life of injection mould, that is point 3, which can help you save much cost compared with others not doing regular maintenance. And it including the correct tool assembling and disassembling procedure. Now list some for your reference here:

  They usually can fall into parts in SINO's proposal:

a.       Daily Maintenance

a.1. Checking & Cleansing both Parting Surface.

a.2. Connecting & Testing Cooling Channel should be ok.

a.3. Checking Heating System under H.R. Instruction.

a.4. Adding enough Lubricant for smooth core pulling movements.

…

b.       Protective Technique （quarterly）

b.1. Checking & Cleansing both Parting Surface.

b.2. Cleansing Venting-Groove.

b.3. Connecting & Testing Cooling Channel on Airproof Guard.

b.4. Disassembling & lubricating& changing  Core pulls, Sliders & Lifters.

b.5. Inspection of Tool Parting Surface’s Joint.

…

Hope that it can help you in some way. Any questions or more info, kindly contact me.

sino holdings group

Lucy is always here for you.

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

Indoor PC Chair Mould Manufacturer

A good PC chair mould maker will be the key element to start a successful business. Maybe someone will say: wow, you wasted an entire blog on that a simple thing? Yep, I can't stress enough how important picking the right supplier for the tool is. Especially for those people responsible for their jobs know how hard it is, though it seems that there are two things need to check: quality and price.

And personally, above all, what the mould manufacture can do for me, it will be considered by me if I were them looking for a good supplier for mould. List the indoor PC chair mould as an example, something I will need to check, as the following:

PC chair mould maker

1.       How can they ensure the PC chair is exactly what I want? That’s, how they make the mould for chair and can they ensure the production capacity without much troubles during mass production?

2.       How much I need to pay as I need to control in budget? And if could, more investment should be saved.

3.       Can they offer the timely service for us once meet something not solved easier? As each temporarily out of production will cost much.

These are parts of what will be paid attention to when pick up final supplier for plastic chair, which is what SINO is trying to improve itself to put away your worries.

Details can be show if you’d like, anyway, Lucy is always here for you.

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

DKM 850T Injection Machine for Outdoor Chair

DKM 850T plastic injection machine with the injection capacity up to 10015g, for big plastic product or multi-cavity mould. Dakumar is improving performance of machine by R&D team headed by CTO from Italy. At present, it can save 30-70% energy compared with traditional one.

If you are looking for big ton injection machine for making plastic product like rattan chair, then you will find that DKM 1650T machine may be the best as you are keen to quality and competitive price. And it is such told by our partners who used DKM injection machines.

There are some details that you will find that how DKM machine is, as following:

1.       High performance of machine running, it’s beyond my words, but you can visit our factory to feel it by yourself or some videos.

2.       After-sale service is pretty timely as some service centers and our professional engineers. One partner usually said that just a call, then within few minutes can find the reasons and solutions while they tried several hours before.

More advantages of DKM machine can’t be listed here one by one, once you put a DKM machine into service, you will see.

By the way, DKM is brother company of SINO HOLDINGS GROUP, thus if you’d like to start a new project, like chair, there will be ready solution for you including mould, machine, auxiliary equipment, injection workshop layout, etc.

DKM 850T machine for outdoor chair

More info, kindly contact me, Lucy is always here for you.

Lucy

sales9@sinomould.com

 +8615757605003 (WhatsApp, online service for you)

Setup a Factory for Plastic Bi-color Tableware

Sometimes, I wonder that how bi-color tableware is made, and now I see. But you? Especially for those one who'd like to start a plant about making two-color plastic product but not understand the way. Which could not only for tableware, but others, like stationery products, especial for plastic one, SINO have offered turnkey solution, guide, injection moulds, two-color injection molding machines, training, for fountain pens, rulers and plastic pencil box, kinds of containers for latex paints, and oil paints, oils, etc.

Regarding people would like us to offer quotation for BI- Injection molding solution at first, as I see that the investment is really significant for those people who are willing to start a new business. Thus, this time I’d like to list what info necessary for setting up a plastic making factory,   which could help us offer the best solution with the most competitive price for you:

1.       Factory building

Ready or being built or plan to construct. What should be talked is about the room and some structures, so the layout of the injection molding can be offered.

2.       Voltage for machine working

It’s pretty important for the machinery, though there is experience for judging by ourselves according your country, there still are differences between different areas. Pls let me know the details like 380V 3HP 50HZ.

3.       The product you'd like to make

Pls show me info about your bi-color product:

Usage of them - which could help us judge the moulds’ and machines' special requirements as our experience;

     Plastic - PP, PET, HDPE, or others; new or recycle plastic;

     Grams and dimension of product;

     Etc.

4.       The type of machine for making bi-color products

As what said in another blog for types of dual-color injection machine, which I'll just skim over: Bi-color injection machine with two parallel injection units; Angle Injection machine.

Enclosed is new video of molding solution for bi-color product, which could make it clear.

Kindly let me know your ideas. Lucy is always here for you. :)

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

Production Line for Automatic Mineral Water Bottle

How thousands of bottles of mineral water are produced? How to start a water bottle factory? Well, Sino Holdings Group could answer those doubts. Actually, SINO is engaged in providing support to those who’d like to develop their career.

At first, let’s enjoy a exquisite video about how bottle is molding automatically with filling system and packaging! 

As video shows, you can see that the major processes could be three parts:

1.       Preform injection molding

Necessary equipment and tool: plastic material, preform injection mould, injection machine, auxiliary equipment

It’s pretty significant process for whole project, which requires ensuring the quality of preform with less weight (reduce cost), because the performs are good or not will decide the following stage’s quality.

2.       Bottle blowing molding

Necessary equipment and tool: preforms, blow mould, bottle blowing machine

Key process, no matter how outstanding preform is, if there were something not so good among the blowing machine or tool or technological parameter, final bottles would fail.

3.       Filling and packaging for final product

Cleanliness is a healthy element, especially for food and water. Thus the filling and packaging should ensure the bottle of water safe! So the water source should keep good, then it should pass washing, filling, tightening the lid securely (assembling)

Of course that it’s simplified bottle of water production line, but other details SINO could also offer suggestion and help you do it as well, that’s total solution, since there are much partners in China. It will be glad to know you.

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

Angle Injection Machine for Bi-color Plastic Product

Bi-color plastic injection solutions could be three types according the double-color injection molding machine’s specific, which you can find in another blog about moulds for two-color product as well. Today, I’d like to talk about the angle injection molding machine for clear dual-color plastic, which you can find in Dakumar (member of Sino Holdings Group).

There are 3 kinds of injection machine for making two-color product, but if just use one injection mould, then it could be two type:

      

      a. Bi-color injection machine with two parallel injection units.

        That achieve two-color cup molding is worked by plate of machine rotating.

        For this machine, the design is pretty different than others, so the price will be much higher, if you bought ever, you would know.

     

      b. Angle Injection machine

        This machine can be equal to a normal SV injection machine + another injection unit perpendicular to machine's body. Like video shows (In my YouTube about bi-color injection molding solution from SINO).

        As this design is simpler than the bi-color injection machine, the investment will be less.

Thus I usually suggest this machine for the beginners and those about to knock at the door to the plastics industry, as it’s better for them to operate with less prior-period investment.

Angle Injection Machine for Bi-color Plastic

As picture of DKM angle injection molding machine for two-color plastic product, like cups, helmet, chair for kids, etc. Welcome to contact me for more info, Lucy is always here for you.

Lucy

sales9@sinomould.com

+8615757605003 (whatsapp, online service and urgent call)

Bi-color Milk Cup Injection Mould

Bi-color plastic product is a wonderful invention in life, especially for dual-color cup, as you could find cup nearly anywhere. Sino Mould offers best solution for making bi-color injection mould as required by partners for above 20-year. There are 4 major series moulds of cup listed:

And to make it clearer, show you a video about some of them.

Series A:

Double color mould (mould revolving) for Angle injection machine

It’s a bi-injection mould with the rotation system. As video shows, you can see that it could get two cups (one is finished and one is ready for second molding) for one-time injection, then the mould core is rotated the mould 90 degrees for injection again, such cycle.

Hence, the mould action and precision and other details should be controlled well.

Series B:

Double color mould (machine revolving) for bi-color injection machine

This is a mould similar to A, but the mould action is normal, because the revolve to achieve two-color cup molding is worked by machine, you can find that it’s exactly the plate of machine moving to rotate the mould for second again.

Thus, what should pay more attention is the mould design for higher precision and shorter cycle time, except the matching to machine.

Series C:

Mixed color mould, it’s normal as plastic mould; just require the injection machine, so just list for your reference this time.

Series D:

Overmolding mould for normal injection machine

Usually, they are two similar moulds with sequent producing, one after the other, which require much higher sensitivity of design, thus could achieve more smooth procedure, better cup quality, and larger benefits (less investment as it could use normal injection machine to mold bi-color cup while no plan for double-color injection machine in the near future).

For more info and videos of double color injection mould, kindly contact me. SINO is always here for you.

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

Characteristic of DKM PET Injection Molding Machine

There are series of injection machine for plastic in Dakumar：H/HH, SV(energy saving), PVC, Bi-color and PET. How about features of PET injection molding machine, accrued as the PET material’s special property, could meet the requirements of making PET product, such as PET preform, PET tube, PET caps and so on. Shortly, PET machine is custom one while normal one could not pass muster of PET molding.

As PET material’s special info is introduced in my last blog, now, show you how PET injection machine is.

Basic Features:

1.       Specialized screw set with larger L/D (ratio length/diameter) and other special design, improving plasticization capacity;

2.       Multi- section precise temperature control of barrel;

3.       Nozzle optional meet requirement of preventing the overflow of PET material;

4.       Dryer selected match to machine well to make less moisture for PET;

 All of them are designed to help PET molding smoothly and few flaws in product, which also prolong the machine’s working life.

And I’d like to list some points else pretty good for DKM machine, including the PET injection machine:

5.       Eight languages you can choose for better operation

English, Arabic, French, Russian, Spanish, Turkish, Farsi, Thai. And if the language you’d like can’t find here, we could offer related installation service else.

6.       There are much service center around the world, ensure the service quickly; and our engineers could go to your factory to offer related train and service as well.

7.       Top-class component of machine

Enclosed is part of sheet about electronic parts.

Electronic & Electrical Components
Controller	KEBA from Austria	Breakers	Schneider from France
Electronic Ruler	NOVO from Germany /GEFRAN from Italy	Three-phase  automatic Breaker	Schneider from France
AC Contactor	Schneider from France	Single-phase Breaker	Schneider from France
Proximity Switch	OMRON from Japan	Two-phase Breaker	Schneider from France
Stroke Switch	OMRON from Japan	Three-phase Breaker	Schneider from France
SSR (Solid State Relay)	CRYDOM from USA	Photoelectric Switch	OMRON from Japan

DKM PET injection machine, when you know about it, you will find how it is and happy to own one!

DKM PET injection machine 650T

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

Multi-cavity PET Preform Mould with High Accuracy

Sino Mould makes high standard mineral water PET preform moulds for partners, which own good performance with longer mould life, meeting the requirement of mass production. There are kinds materials of Injection perform: PET、PVC、PP、PAN, regarding PET preform (strength of extension is more 5-10 times than PE), for further processing, is usually used to be blowed to bottles with different shape (like round, square, or others), and those bottles may be for packaging liquid, such as sodas, inebriant (beer, wine), juice, water, oil, condiment, medicines, cosmetic, etc.   

Now, some points are listed for PET preformmould compared with other moulds:

1.        The steel of mould core and cavity.

As PET’s characters, mould steel should meet enough heat transfer efficiency and thermal conductivity. We usually use steel S136 for core and cavity of mould if customers have no other special requirements for steel.

2.       High standard for mould making.

This requires automation tooling equipment with high precision and measurement equipment, which could ensure that the precision of mould, when making the PET preform, it will be smoothly and no flaws.

Regarding this, I have to say that we owns pretty top equipment in China, when you visit SINO, you will find it valuable for PET preform mould maker to have rich experience and R&D capacity. That’s why we could make large multi-cavity preform mould (72-cavity one).

3.       The mould structure

For PET preform mould, the structures could be depend on the injection gate: direct gate, point gate, valve gate. And valve gate is suggested for partners, as much advantages here, like, shorten cycle time and save material in same condition, and when it blowing to be bottles, the bottom will be smoother, and improve the percent of pass.

There are others need to pay as well, for example, the interchangeability of weight of PET preform, material changing or special material, and so on. Each detail should not be ignored! SINO’s engineers are engaged in improving quality of plastic mould for PET preform now and in future. Hence, it also increases competitiveness of you and SINO for the long running.

PET PREFORM MOULD WITH EQUIPMENT FOR MAKING BOTTLES

Welcome to visit SINO!

Lucy

sales9@sinomould.com

+8615757605003 (WhatsApp, online service for you)

Efficient Injection Machine for Plastic Home Appliance

Sino Holdings Group is famous for plastic mould supplier (SINO MOULD) both at home and abroad, and recent years, as its custom plastic injection machine with high efficiency and energy saving, one of the members, Dakumar Machinery Co., Ltd. (DKM) is being popular and reputed in our partners.

DKM FACTORY FOR INJECTION MACHINE 

When people are looking for injection machine, the first is model, which should match their moulds, and base on this, they must pursue particularly good value for money of machine, so that their production line will be more efficient. And exactly to satisfy our partners, DKM apply top-class components in machine, like computer is KEBA, kinds of switch is OMRON, and breaker is Schneider, etc.

Custom injection molding machine can be offered for your product, for example, as the injection machine for making household appliance, like, refrigerator inner cabinet liner. The basic info is about container’s size, weight, plastic material, and special structure, which will affect the design of machine:

Size and weight → model of injection: injection weight, clamping tonnage, tie-bar distance, etc.

Plastic → screw of machine, such as, if the material is PC for container, then we should use special screw for it, as PC owns poor flow characteristics and takes in moisture easier, then the molding will be easier than normal screw.

Special structure → special action of mould → component of machine, like, if need to add additional air valve, lateral sliding.

Thus you will find that the injection molding machine is standard machinery but also customized, and most important of them will be the service. DKM offers a turnkey solution for your project development which include free machine analysis & design + production run + assembly + custom packing + shipping+ training and all others according to client's request.

More info, welcome to talk:
Lucy
sales9@sinomould.com
+8615757605003 (WhatsApp, online service for you)
anole-hc-01 (skype)

Precision PP Salad Container Mould

When those people, work in industry related with foodstuff box (packaging salad, mousse, jelly, ice cream, juice), pursue the key competitiveness of sustainable development, which deeply roots in precision plastic mould for food grade container. And what SINO HOLDINGS GROUP devotes to doing is exactly offering plastic food box mould with quality and the best price to partners.

As I talked in other blogs, starting a new plant for molding IML container is not easy, what should consider is not only for now, but also in the long running. The one of the key elements is plastic injection mould for thin-wall container, which I also have mentioned in blogs. So now, as an example, I take a 2-cavity mould of 250ml PP salad can for your reference.

2-cavity  250ml PP salad container mould for molding line

At first, the product you’d like to make must be clear enough, so SINO team could design it in line with your requirements with our professional suggestion of improvement. Such as:

  Product basic info:

  PP thin wall container for salad with IML (categories of product, plastic, usage, need IML or not)

  And size:

Capacity	Max. 250ml
Dimension Up	139*98mm
Dimension Bottom	90*65mm
Height	45mm
Weight:	11.4 g

  Thus we offer corresponding salad container mould design:

Mould size	416*256*275mm
Cycle time	4-6s (which also depends on machine)
Cavity	2
Gate Way	valve gate, pin gate
Mould Material	S420,2344,2738,2311
Suggest machine	DKM-200HH

For high speed injection, the mould must be design well and made with suitable structures (cooling system, insert, center distance, etc), the more precision mould is, the longer life it will be, thus a more cost efficient solution you will get.

Your investment of plastic food container mould, ensured that it is greatly protected, as SINO insist in pursuing high quality mould with turnkey solution, competitive price, satisfactory after service and persisting in company development.

More info or inquiries, kindly contact me:

Lucy

sales9@sinomould

+8615757605003 (WhatsApp, online service for you)

anole-hc-01 (skype)