After many years of hot runner system’s researching and developing,Anole hot runner can reach the minimum injection quantity to 0.1g. hot runner is widely used in auto,electric,packaging industry and medical skill components,and now Anole is successful completion of multy-cavity processing technology,there can be a maximum of 128 cavities to produce top surface into the glue and side into the glue.
In the recently, more and more manufacturer choose hot runner system. Hot runner system is by heating way to ensure that the plastic of runner and gate in a hot melt. Due to the heater strip and heater coil was equipped in near or center runner ,the whole runner from nozzle exit to gate is in high temperature condition. So the plastic in the runner is melting, when the injection machine starts again , we needn’t take out the condensed material in hot runner , and the next time use we just need to make the temperature to reach the required. Because of the high efficiency and save the plastics raw materials. Hot runner can improve the quality and appearance of the products. Moreover, hot runner system is used to reduce mold opening stroke and shorten molding cycle.
If u r looking for the hot runner of plastic mould,welcome to inquiry. Anole is ur best choice!
Lucy
Skype :anole-hc-01
E-mail :service2@anole-hot-runner.com
In the recently, more and more manufacturer choose hot runner system. Hot runner system is by heating way to ensure that the plastic of runner and gate in a hot melt. Due to the heater strip and heater coil was equipped in near or center runner ,the whole runner from nozzle exit to gate is in high temperature condition. So the plastic in the runner is melting, when the injection machine starts again , we needn’t take out the condensed material in hot runner , and the next time use we just need to make the temperature to reach the required. Because of the high efficiency and save the plastics raw materials. Hot runner can improve the quality and appearance of the products. Moreover, hot runner system is used to reduce mold opening stroke and shorten molding cycle.
If u r looking for the hot runner of plastic mould,welcome to inquiry. Anole is ur best choice!
Lucy
Skype :anole-hc-01
E-mail :service2@anole-hot-runner.com
没有评论:
发表评论